ISW horizontal clean water pump for the transport of clear water and other liquids with physical and chemical properties similar to clear water, Suitable for industrial and urban water supply and drainage, high-rise building pressurization water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching, use temperature 0℃-200℃. Main parameters of ISW horizontal centrifugal water pump(TEFLOW) Flow:3.6m³/H-800m³/H(3600L/H-800000L/H) Head:12.5M-150M(1.25bar-15bar) Power:0.75KW-160KW(1HP-215HP) Applicable medium:Clean water, sewage, sea water, domestic water Pump body material:Cast iron, SS304,SS316,SS316L
ISW horizontal pipe centrifugal pump products
◆ ISW horizontal water pump, other liquids used for the transport of water and physical and chemical properties similar to water, apply to industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster, long-distance transport, warm through the refrigeration cycle, bathrooms and other warm and cold pressurized water cycle and supporting equipment, the use of temperature t≤80 ℃. ◆ ISWR horizontal heat pumps widely used in: metallurgy, chemical, textile, paper, and hotels and restaurants and other boilers, circulation of urban heating system, ALWR type temperature t≤120 ℃. ◆ ISWH horizontal chemical pump for conveying solid particles, corrosive. Viscosity similar to water, apply to the petroleum, chemical, metallurgical, power, paper, food, pharmaceutical and synthetic fiber and other departments, the use of temperature -20 ℃ ~ + 120 ℃. ◆ ISWY horizontal pipeline oil transport gasoline, kerosene, diesel and other oil products, or flammable, explosive liquid, is transported medium temperature of -20 ℃ ~ 120 ℃. ◆ ISWHY horizontal stainless steel explosion-proof chemical centrifugal pump is applicable to transport inflammable chemical liquids. ◆ ISWD horizontal low speed pump to meet the requirements of low ambient noise situations, temperature t≤120 ℃.
◆ The suction pressure ≤1.0mpa, the maximum working pressure or pump system ≤1.6mpa, namely suction pressure + pump head ≤1.6mpa, hydrostatic test pump pressure ≤2.5mpa, please specify when ordering system working pressure. 1.6mpa working pressure pump system should be greater than in the order presented separately, in order to manufacture the pump flow part and a coupling portion using steel materials. ◆ The ambient temperature <40 ℃, relative humidity <40%. ◆ The transmission medium volume fraction of solid particles per unit volume of not more than 0.1, particle size <0.2mm. NOTE: If with small particles, please when ordering with the media so that manufacturers use wear-resistant mechanical seal.