Description
Introduction
KCB gear pump is suitable for transporting liquids without solid particles and fibers, such as crude oil, diesel, lubricating oil, animal and vegetable oils, etc. The liquid temperature is not higher than 70°C, and it is non-corrosive. If you want to transport high temperature liquids, you can tell us in advance, and our company can customize gear pumps for you with high temperature resistant materials. KCB series gear pumps are often used as oil transfer pumps, also called gear oil pumps or gear oil transfer pump.
Model KCB gear oil transfer pump uses the meshing of gears to pump fluid by displacement.It is one of the most common types of pumps for hydraulic fluid power applications. It is also widely used in chemical installations to pump high viscosity fluids.
Application Scope
●They are used as the oil pumps in the engines for supplying the lubricating oil and cooling purposes.
●They are also used in the automatic transmission systems, semi-automatic clutches, power steering and propulsion systems.
●In Petrochemical industries, they are used for the transfer of crude oil, diesel, etc.
●In the food industries, they are used for transferring oils, butter, vegetable fats and similar highly viscous foods.
●Used in the paper and pulp industries, soap, latex and chemical industries
Technical details:
1.Motor: 4 or 6 pole quality IEC motor configurations, with high level class(class F or higher) and insulation(insulation IP44 or higher), in both 50Hz or 60Hz, Y-H series, suitable for marine purpose, explosion-proof motor is an optional, Starting in direct type(small power) or Star-delta type.
2.Material: pump casing and cover: cast iron, pump gear couples: 40Cr stainless steel, shaft: carbon steel #45, (optional material in stainless steel or bronze)
3.Shaft seal: mechanical seal, material SIC(silicon carbide)/hard alloy, (optional for double face mechanical seal, soft packing and rubber oil seal)
4.Coupling: elastic coupling type, material in carbon steel.
5.Bearing: motor side, two enclosed antifriction bearing, lubricated by grease; pump side, two internal quality bearings immersed in the pumped liquid
6.Self-priming: positive displacement pump, suction head about 4-5 meters
7Relief valve: internal relief valve insides, setting pressure 1.5 times of discharge pressure.
Technical Specification：
